20 Fun Informational Facts About Upvc Window Replacement Hinges

Choosing Upvc Window Replacement Hinges

It's not as difficult as it could appear to select and install the replacement hinges made of upvc. Make sure that the arrows on the hinges face in the correct direction, and then measure the thickness of the hinge arms on the opening frame (13mm or 17mm).

There are many different kinds of hinges, each with their distinctive characteristics. This article will focus on the most commonly used kinds of uPVC window hinges and the advantages they offer.

Egress/Easy Clean Hinge

They are a great choice to replace or upgrade the fire escape safety window, as they are able to open at a 90-degree angle. They can also be removed to an 'easy clean' position to allow you to easily access the exterior of windows to clean them without the need to climb on a ladder or lean over at angles that could be dangerous.

Yale is among the most trusted and well-known brands in the field of home security. They work with all kinds of uPVC side-hung windows. They can be moved into the easy-clean position by pressing in a small button and then moving the double glazing window hinges sash to one side. When the window is closed, the sash will be returned to its original position.

Both 13mm and 17mm sizes are available. Make use of our Egress Selection Guide to help you select the best product for your window.

The hinges are designed to work with a standard side-hung frame that is made of aluminium or uPVC. They are equipped with an easy friction screw that can alter the amount of resistance generated. This makes opening the window easier and reduces the chances of a mistaken closing in high winds. They have been tested to more than 30000 cycles and are in compliance with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

The Nico Egress Easy Clean friction hinge is easy to operate and has no buttons or catches. It is a simple and secure solution for emergency exit and cleaning. Firstly, open the window to the egress (full opening) position, and then press the hinge retaining clip located on the inside of the bottom corner. This will release the top and bottom catches which will allow you to move the sash into an easy-clean position. Once you are in the clean position close the window to return the hinges to their egress position.

Fire-Escape Hinge

Fire Escape Hinges (also known as "Easy Clean") are used to replace windows with side openings to protect against fire. These types of window hinges open more wide and faster than standard hinges to allow a large clear opening to escape in the event of a fire. This kind of hinge is legal in any room with a window according to building regulations.

They have an exclusive friction stay that opens the window to a 90 degree angle and also allows the sash opening to slide across the glass when it is open for easy cleaning of the outside of the glass, without having to climb ladders. The hinges are simple to use and have no complicated buttons or catches. They can be operated from the inside of the home using a simple, safe lever.

The hinges are made in the UK by Cotswold and come with a child safety restraint for day to day use that can be reverted by a hidden button, giving you peace of thought that your children won't accidentally open the window too far. They are available in 13mm and 17mm stack heights.

To purchase these hinges, take a measurement of the length of your existing side-hung window hinge which is fixed to the frame (see the article on measuring your upvc window hinges). Select the correct size hinge from the list below.

Be aware that the measurement is taken from the component that attaches to the frame not the sash, the actual hinge length could be longer or shorter depending on the manufacture of your old windows. When deciding the width cost of replacing window hinges the hinge most upvc frames will fit with a height of 13mm however if your previous window frame measures 17mm, choose this option. Alternately, you can install the 4mm packer to make up for the difference. All hinges come in two different directions (1 left and one right). Screws aren't included with the hinges. These can be bought separately if needed. Our window repair screws made of upvc are highly recommended. These screws are designed to increase your hinges' performance and allow them to operate smoothly for longer. They feature a less friction design and a better weather seal with a new nylon reducer cap.

Restricted Hinge

There are occasions when a stiff window hinges needs to fully open and this can be a challenge with the standard hinge. These child safety friction hinges are a fantastic solution to this problem. They can be used when ventilation is required but escaping or cleaning the flame is not possible. They limit the possibility of opening the sash and permit the override of this limitation by pressing the button. They are suitable for both side and top-hung windows and come in 13mm and 17mm stack heights.

The Nico Restricted Egress Friction Hinge blends the advantages of a standard restrictor and a fire escape hinge to provide an efficient and easy way to comply with building regulations. It is available in 13mm or 17mm stack heights and can be used for the top and side openings of uPVC window. It comes in a pair with one hinge being the one that is restricted for egress, and the other hinge being unrestricted. This lets one hinge be installed at the bottom and the other is set at the top.

These uPVC restricting hinges have been tested to BS6375 part 2. They are intended to be used on windows that isn't able to be fully opened, like a small child's bedroom. The mechanism restricts how far the sash can open to a safe position of 100mm, and re-engages once the window is closed.

These uPVC hinges with friction can be used with all types of windows. They are particularly suitable for windows that are hard to reach, such as those in three-storey apartments or those which would require a ladder. They can be paired by our security features like hinge guards, protection plates for hinges or dog bolts to offer PAS 24 performance.

It is essential to measure your existing window hinge to be able to find replacements that are the same size. This can be done by looking at the image gallery of the hinge and then deciding the best place to put it. The top hung hinges can only be placed on one side, whereas the side hung hinges can only be put on one side.

Standard Hinge

A standard hinge uses metal-to-metal contact and no extra parts to decrease friction. It is available in a variety of finishes, and is fire rated. To quickly determine the radius of a hinge, lay it out flat and place a quarter and dime in two corners. If the dime fits better, the corner is rounded by 1/4 inch. If the quarter fits better, it's rounded to 5/8 inch.

The proper hinge can enhance or break the appearance of your door. The style and design of the hinges to your door will give it an attractive and well-integrated look.